Thermocouple

FEP extension grade thermocouple is used indoors and outdoors in high temperature environments (200C) to extend a thermocouple signal from a probe back to the instrument that reads the signal.

Conductor: Solid conductor alloys

Insulation: FEP Teflon

Shield: Overall shield w/ drain wire

Jacket: FEP Teflon

Flame Test: VW-1

Note: PLTC Rated

Application: Shielded extension grade thermocouple is used to extend a thermocouple signal from a probe back to the instrument reading the signal. PLTC (power limited tray cable) rated and suitable for Class 1, Div 2 HL locations.

Conductor: Solid conductor alloys

Insulation: PVC

Shield: Indivdual Overall shield w/ drain wire

Jacket: PVC

Flame Test: UL 1581

Shielded extension grade thermocouple is used to extend a thermocouple signal from a probe back to the instrument reading the signal. PLTC (power limited tray cable) rated and suitable for Class 1, Div 2 HL locations.

Conductor: Solid conductor alloys

Insulation: PVC 

Shield: Overall shield w/ drain wire

Jacket: PVC

Flame Test: UL 1581

Shielded extension grade thermocouple is used to extend a thermocouple signal from a probe back to the instrument reading the signal. PLTC (power limited tray cable) rated and suitable for Class 1, Div 2 HL locations.

Conductor: Solid conductor alloys

Insulation: PVC 

Shield: Overall shield w/ drain wire

Jacket: PVC

Flame Test: UL 1581

Application: FREP extension grade thermocouple is used indoors and outdoors in environments where additional flame or heat protection is required to extend a thermocouple signal from a probe back to the instrument reading the signal. TC (tray cable) rated and suitable for Class 1, Div 2 HL locations.

Conductor: Solid conductor alloys

Insulation: XLP or EPR

Shield: Individual + Overall shield w/ drain wire

Jacket: Chlorinated Polyethylene (CPE)

Flame Test: ICEA 210,000 BTU/hour flame test/IEEE 383 70,000 BTU/hour flame test