Medium Voltage

Recommended for low and medium voltage power of 5000 volts. Used primarily in control circuits and for airport lighting. 5KV XLP power cables can be used in conduit, duct and direct buried.  The temperature rating is 90C.

Conductor: Stranded bare copper

Insulation: Cross-linked polyethylene (XLP)

Airport Lighting: Sizes meet specs for Federal Aviation Admin per L-824-Type C.

Application: 5KV/8KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated.The temperature rating is 105°C.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)

Shield: Copper tape shield

Jacket: PVC Jacket- 100%/ 133%

Flame Test: IEEE 383 70,000 BTU/hr flame test

Color Code: Click here

5KV/8KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)- 133% 5KV and 100% 8KV

Shield: Copper tape shield

Jacket: PVC Jacket

Flame Test: IEEE 383 70,000 BTU/hr flame test

25KV/ 35KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated. The temperature rating is 105C.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)- 133% 25KV and 100% 35KV

Shield: Copper tape shield

Jacket: PVC Jacket- 100% / 133%

Flame Test: IEEE 383 70,000 BTU/hr flame test

15KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated. The temperature rating is 105C.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)- 133% level

Shield: Copper tape shield

Jacket: PVC Jacket

Flame Test: IEEE 383 70,000 BTU/hr flame test

Medium voltage power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)

Armor: Aluminum interlocked armor (AIA). Special order for galvanized steel armor.

Jacket: Yellow PVC Jacket

Color Code: Click here

5KV/8KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated. The temperature rating is 90C

Conductor: Stranded bare copper

Insulation: Cross-linked polyethylene (XLP)

Shield: Wire shield

Jacket: PVC jacket

15KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. The temperature rating is 90C.

Conductor: Stranded bare copper

Insulation: Cross linked polyethylene (XLP)- 133% level

Shield: Wire Shield

Jacket: PVC Jacket

35kV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (cable tray) rated. The temperature rating is 105C.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)- 133% level 35kV

Shield: Copper tape shield

Jacket: PVC Jacket

Flame Test: IEEE 1202 70,000 BTU/hr flame test